Conrac 410 Hand Bender
Conrac 410 manual hand tube bender. A bench- or stand-mounted rotary draw bender for small-diameter tube, suited to low-volume production, prototyping, and maintenance work with no power required. Contact us for condition, tooling, and a quote.
Brand:
Conrac
Model:
410
Condition:
New
Not sure what Machine, Parts, or Tooling you need? We can help!
This Conrac Model 410 (HB-1) is a bench-type manual tube bender in like-new condition, with little to no wear. It was acquired in a lot purchase and is still in its original box.
It bends tube up to 3/4″ OD x .065″ wall at a minimum 2D centerline radius, and pipe up to 3/8″ IPS Schedule 40, with a 6″ maximum centerline radius and bends to 210°. Bending is reversible for right- or left-hand work. Clamping and the pressure (follower) die are manual toggle, and a graduated 180° degree-of-bend dial is used to set the bend.
The bender uses 1/2″ CLR-height bend dies with matching clamp and pressure dies and mandrels, and it is compatible with Leonard 410 and PHI 410 hand benders. Contact us for tooling availability and a quote.
| Specification | Value |
|---|---|
| Manufacturer | Conrac |
| Model | 410 (HB-1), bench type |
| Bend type | Manual rotary draw (hand bender) |
| Tube capacity | 3/4″ OD x .065″ wall max, 2D min. CLR |
| Pipe capacity | 3/8″ IPS Sch. 40 max |
| Max centerline radius | 6″ |
| Max bend angle | 210° |
| Bend direction | Reversible, right or left hand |
| Drive | Manual direct |
| Clamping / pressure die | Manual toggle |
| Calibration | Graduated 180° degree-of-bend dial |
| Floor space (incl. sweep) | 20″ x 13″ |
| Shipping weight | 100 lbs |
| Tooling | 1/2″ CLR-height bend dies, clamp and pressure dies, mandrels |
| Compatible with | Leonard 410 and PHI 410 hand benders |
| Condition | Like new, in original box |