Clarke & Lewis UTB CL-400 CNC Hydraulic Tube Bender

The UTB CL-400 CNC is a 3-axis CNC rotary hydraulic tube bender for 6″ x .165″ mild steel, 6″ x .250″ non-ferrous tube and 4″ Sch 80 pipe, with a 24″ max centerline radius and 12′-6″ over mandrel. Great for heavy-wall pipe, exhaust, hydraulic and process lines run in production volumes.

Brand:

Clarke & Lewis

Model:

UTB CL-400 CNC

Condition:

New
Not sure what Machine, Parts, or Tooling you need?  We can help!

The Clarke & Lewis CL-400 CNC, item number UTB CL-400 CNC, is a heavy-duty rotary hydraulic mandrel bender with 3-axis CNC control. It bends tube up to 6″ OD (6″ x .165″ mild steel, 6″ x .250″ non-ferrous, 6″ x .125″ stainless), 4″ Sch 80 pipe and 3-1/2″ mild steel round bar, up to 180° plus 15° overbend.

How it works. The CNC programs degree of bend (DOB), distance between bends (DBB) and plane of bend (POB), so a stored bend sequence repeats from part to part. DOB and POB resolve to 0.1° and repeat within ±0.1°. A 15 hp hydraulic drive turns the bend arm at up to 2.3 rpm, adjustable for heavy-wall work. For setup, prototypes and one-off parts, the machine also runs manually, with two DOB stops and dial positioning for DBB and POB. Standard maximum centerline radius is 24″, with 12′-6″ of tube length over the mandrel.

Where it fits. The CL-400 CNC is sized for large, heavy tube and pipe that has to be bent the same way many times. It’s great for:

  • Heavy-wall hydraulic and process piping
  • Truck, bus and heavy-equipment exhaust systems
  • Boiler, power generation and heat-recovery tube
  • Shipbuilding and offshore piping
  • Agricultural, mining and construction equipment tube
  • Production runs of large multi-bend parts

Tooling. Bend dies, clamp and pressure dies, wiper dies and mandrels are matched to tube OD, wall and centerline radius. UTB carries bend dies and mandrels. Include tube OD, wall thickness, material, centerline radius and the number of bends per part when you request a quote for the UTB CL-400 CNC.

Support. UTB also supplies new replacement parts for Clarke & Lewis machines and provides on-site repairs.

Specification CL-400 CNC
Item number UTB CL-400 CNC
Tube capacity, mild steel 6″ OD x .165″ wall
Tube capacity, non-ferrous 6″ OD x .250″ wall
Tube capacity, stainless 6″ OD x .125″ wall
Pipe capacity, Sch 80 4″ IPS (4.5″ x .337″)
Round bar, mild steel 3-1/2″
Bend angle 180° plus 15° overbend
Centerline radius 24″ max (standard)
Tube length over mandrel 12′-6″ (standard)
Hydraulic drive 15 hp
Bend arm speed Up to 2.3 rpm, adjustable
Controls 3-axis CNC (DOB, DBB, POB); manual mode with 2 DOB stops and dial DBB/POB positioning
Accuracy DOB and POB: 0.1° resolution, ±0.1° repeatability
Approx. shipping weight 14,800 lb, less oil and tools

Request A Quote

Provide us as much detail about your request as possible. If you have any questions about our quoting process, please give us a call.

Name
Address