Clarke & Lewis UTB CL-200 – Rotary Hydraulic Precision Tube Bender

The UTB CL-200 is a rotary hydraulic tube bender for 2″ x .140″ mild steel and tube from 1/4″ to 2-1/2″ OD, with a 10″ max centerline radius, programmable degree-of-bend control and hydraulic pressure die assist. Great for exhaust tubing, roll cages, hydraulic lines and equipment frames.

Brand:

Clarke & Lewis

Model:

UTB CL-200

Condition:

New
Not sure what Machine, Parts, or Tooling you need?  We can help!

The Clarke & Lewis CL-200, item number UTB CL-200, is a horizontal rotary hydraulic mandrel bender for small and mid-size tube. It bends 2″ OD x .140″ wall mild steel and handles tube from 1/4″ up to 2-1/2″ OD, up to 180° plus springback on centerline radii up to 10″.

How it works. A Clarke & Lewis programmable degree-of-bend control sets the bend angle, so repeat bends come out the same. Hydraulic pressure die assist pushes material into the bend to help hold wall thickness and reduce flattening. A drop-away clamp die makes loading and unloading parts quick, and a hydraulic mandrel extractor pulls the mandrel at the end of each bend. The machine runs on 230/460 V three-phase power and is available in right-hand or left-hand rotation.

Where it fits. The CL-200 is a straightforward hydraulic bender for shops bending 2″ and smaller tube without CNC. It’s great for:

  • Exhaust and intake tubing
  • Roll cages, chassis and frame tube
  • Hydraulic, fuel and coolant lines
  • Furniture, fixture and equipment frames
  • Prototype and short-run parts
  • Repair and maintenance shops handling varied work

Tooling. Bend dies, clamp and pressure dies, wiper dies and mandrels are matched to tube OD, wall and centerline radius. UTB carries bend dies and mandrels. Include tube OD, wall thickness, material, centerline radius and rotation when you request a quote for the UTB CL-200.

Related equipment. For CNC control in this size range, see the UTB CL-200 CNC. For 2-1/2″ tube and 1-1/2″ Sch 80 pipe, see the UTB CL-200HD. UTB also supplies new replacement parts for Clarke & Lewis machines and provides on-site repairs.

Specification CL-200
Item number UTB CL-200
Tube capacity, mild steel 2″ OD x .140″ wall
Tube size range 1/4″ to 2-1/2″ OD
Bend angle 180° plus springback
Centerline radius 10″ max
Controls Clarke & Lewis programmable degree-of-bend control
Clamping Drop-away clamp die; hydraulic pressure die assist
Mandrel extractor Hydraulic
Rotation Right-hand or left-hand
Electrical 230/460 V, 3-phase, 60 Hz
Approx. footprint (L x W x H) 160″ x 50″ x 50″
Approx. shipping weight 3,000 lb

Request A Quote

Provide us as much detail about your request as possible. If you have any questions about our quoting process, please give us a call.

Name
Address