Clarke & Lewis Manual Tube Benders

Clarke & Lewis manual tube benders bend small-diameter tube by hand, with no hydraulics, wiring or power required. The five models range from a bender that clamps in a bench vise to mandrel benders on their own tables, covering tube from 1/8″ to 1-1/2″ OD. They give accurate rotary draw bends at a fraction of the cost and footprint of a powered machine.

Manual Tube Bender Features

Capabilities

Tube from 1/8″ OD (CL-62) up to 1-1/2″ OD non-ferrous (CL-150M)

Centerline radii from 1/2″ to 8″, with bends to 180° and beyond

Mandrel bending on the CL-75M and CL-150M for thin-wall tube that would otherwise wrinkle or flatten

Repeat bends without re-measuring: adjustable stops on the CL-75BB, preset stops for up to 10 bends on the CL-75M, and a plane-of-bend carriage on the CL-150M

Mounting to suit the shop: bench vise (CL-75), workbench (CL-75BB), or table and cabinet (CL-75M, CL-150M)

Choosing a model

Smallest tube, from 1/8″ OD: UTB CL-62

3/4″ mild steel in a bench vise: UTB CL-75

Compact bench bender for 1″ non-ferrous tube: UTB CL-75BB

Repeat multi-bend parts up to 1-1/4″ with a mandrel: UTB CL-75M

Largest manual capacity, 1-1/2″ non-ferrous, with a geared ratchet: UTB CL-150M

Great for

Instrument, hydraulic, fuel and brake lines
Copper and aluminum HVAC and refrigeration tube
Aircraft and aerospace lines in MRO shops
Prototypes, samples and one-off replacement parts
Maintenance shops, repair benches and trade-school training

Model Specs and Capabilities

SpecUTB CL-62UTB CL-75UTB CL-75BBUTB CL-75MUTB CL-150M
TypeManual rotary drawVise-mountedBench-mountedManual mandrelManual ratchet, mandrel
Ferrous tube1/8" to 1/2" OD3/4" x .035" mild steel—1/4" to 1" OD—
Non-ferrous tube1/8" to 5/8" OD—1/4" to 1" OD1/4" to 1-1/4" OD1/4" to 1-1/2" OD
Bend angleUp to 195°0–195°180° (195° arm travel)180° plus 15° overbend—
Centerline radius1/2" to 4"1/2" to 4"6"6" max8"
ClampingManual toggleButtress-thread screw clampManual toggleManual toggle; collet chuckHand clamping
OperationHand-pulled bend armHand-pulled bend armHand leverHand bend arm4:1 geared ratchet
Mandrel——Optional8 ft over mandrel; foot-pedal extractorYes; hydraulic hand-pump extractor
Repeat bends——Adjustable stop (2nd optional)Preset stops, up to 10 bendsPlane-of-bend carriage
RotationCCW standard, CW on request———Reversible RH/LH
Size / weight—Mounts in bench vise24" x 20" bench; 175 lb12 ft x 3 ft 6 in x 40 in825 lb shipping

Request A Quote

Provide us as much detail about your request as possible. If you have any questions about our quoting process, please give us a call.

Name
Address