Clarke & Lewis CNC tube benders program every bend, so a part with many bends comes off the machine the same way every time. Each model pairs a heavy rotary hydraulic mandrel bender with 3-axis CNC control of degree of bend, distance between bends and plane of bend. The five models cover tube from 1-1/2″ to 6″ OD and Schedule 80 pipe from 1″ to 4″.
CNC Tube Bender Features
Capabilities
- 3-axis CNC: degree of bend and plane of bend at 0.1° resolution and ±0.1° repeatability; distance between bends at 0.01″ resolution and ±0.01″ repeatability, up to 360 in/min
- Plane of bend rotates continuously in either direction (0–359.9°) at 10 rpm
- Manual mode with 2 degree-of-bend stops and dial positioning for setup, prototypes and one-off parts
- Bend arm speeds up to 15 rpm on the CL-200 CNC and CL-200HD CNC for short cycle times
- 180° plus 15° overbend; 10 ft to 12′-6″ of tube length over the mandrel
- The CL-200HD CNC, CL-300 CNC, CL-300HD CNC and CL-400 CNC each have a non-CNC hydraulic version with matching capacity
- Tube capacities are rated at 25,000 psi yield (non-ferrous), 40,000 psi (mild steel) and 60,000 psi (stainless)
Choosing a Model:
- 1-1/2″ tube at up to 15 rpm: UTB CL-200 CNC
- 2-1/2″ tube at up to 15 rpm: UTB CL-200HD CNC
- 3″ tube and 2″ Sch 80 pipe: UTB CL-300 CNC
- 4″ tube and 2-1/2″ Sch 80 pipe: UTB CL-300HD CNC
- 6″ tube and 4″ Sch 80 pipe: UTB CL-400 CNC
Great for
- Production runs of repeat multi-bend parts
- Exhaust, intake and intercooler tubing
- Hydraulic, fuel and process lines in volume
- Furniture, fitness equipment and fixture frames
- Heavy-equipment, agricultural and marine tube assemblies
Model Specs and Capabilities
| Spec | UTB CL-200 CNC | UTB CL-200HD CNC | UTB CL-300 CNC | UTB CL-300HD CNC | UTB CL-400 CNC |
|---|---|---|---|---|---|
| Mild steel tube | 1-1/2" x .109" | 2-1/2" x .109" | 3" x .120" | 4" x .109" | 6" x .165" |
| Non-ferrous tube | 1-1/2" x .188" | 2-1/2" x .203" | 3" x .210" | 4" x .203" | 6" x .250" |
| Stainless tube | 1-1/2" x .049" | 2" x .125" | 3" x .065" | 4" x .065" | 6" x .125" |
| Sch 80 pipe | 1" | 1-1/2" | 2" | 2-1/2" | 4" |
| Round bar, mild steel | 1-1/8" | 1-3/8" | 1-7/8" | 2-1/4" | 3-1/2" |
| Max CLR | 10" | 10" | 12" | 12" | 24" |
| Length over mandrel | 10 ft | 10 ft | 10 ft | 10 ft | 12'-6" |
| Hydraulic drive | 5 hp | 5 hp | 10 hp | 15 hp | 15 hp |
| Bend arm speed | 15 rpm | 15 rpm | 5-1/2 rpm | 3.8 rpm | 2.3 rpm |
| Non-CNC version | UTB CL-200 | UTB CL-200HD | UTB CL-300 | UTB CL-300HD | UTB CL-400 |
| Approx. weight | 3,300 lb | 3,300 lb | 5,400 lb | 5,800 lb | 14,800 lb |
